Gunsmith Punches USA Specification







HOME PAGE PRODUCTS



Gunsmith Punches USA Specification


Gunsmith Punches USA Specification




Brownells Cup Tip Punches Model 1 .057" (1.44mm) Diameter/Long Length in USA Specification
Brownells Cup Tip Punches Model 1 .057" (1.44mm) Diameter/Long Length in USA Specification

USD 17.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-620-001. Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle..057" (1.44mm)/long..066" (1.7mm)/long..072" (1.8mm/long..040" (1mm)/short..050" (1.3mm)/short..050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080620001-080620001-11370.
More....

Grace Brass Punch Set 1/16" (1.6mm) Brass Pin Punch in USA Specification
Grace Brass Punch Set 1/16" (1.6mm) Brass Pin Punch in USA Specification

USD 12.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 116BPP. For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High quality gunsmith punches in U.S.A. specification by Grace, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 354100062-354100062-11370.
More....

Grace Starter Punches 5/32" (4mm) Starter Brass Punch in USA Specification
Grace Starter Punches 5/32" (4mm) Starter Brass Punch in USA Specification

USD 7.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: BSP532. For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High quality gunsmith punches in U.S.A. specification by Grace, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 354000010-354000007-11370.
More....

Brownells Roll Pin Starter Punches #2 Punch in USA Specification
Brownells Roll Pin Starter Punches #2 Punch in USA Specification

USD 7.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 25031939. Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080000243-080000241-11370.
More....

Starrett Automatic Center Punch Starrett Auto Punch in USA Specification
Starrett Automatic Center Punch Starrett Auto Punch in USA Specification

USD 38.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 50119. Automatic, one hand operation leaves the other hand free to steady the work. Fully adjustable for strength of impact. All working parts are hardened. Manufacturer: starrett specs: steel. 3-53/64" (9.7cm) long..405" (10.3mm) diameter. 1 " oz. (42.5g). Knurled body and adjusting cap. Starrett #18aa. High quality gunsmith punches in U.S.A. specification by Starrett, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 827501190-827501190-11370.
More....

Brownells Premium Roll Pin Starter Punches 5/32" Roll Pin Starter Punch in USA Specification
Brownells Premium Roll Pin Starter Punches 5/32" Roll Pin Starter Punch in USA Specification

USD 6.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 532SRSB. Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080001079-080001075-11370.
More....

Brownells Hole Center Punches Set in USA Specification
Brownells Hole Center Punches Set in USA Specification

USD 21.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-732-000. 3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080732000-080732006-11370.
More....

Brownells Roll Pin Starter Punches #3 Punch in USA Specification
Brownells Roll Pin Starter Punches #3 Punch in USA Specification

USD 7.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 25032939. Start the removal of roll or spring pins without causing damage to the pins or the punch. Short shaft starter punch gives you more control by putting your hand closer to the pin and keeps you from bending longer finishing roll pin punches. Made from solid steel, with parallel-ground shanks and knurled handles. Manufacturer: brownells specs: steel, black. Kit contains one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2mm). #3, 3/32" (2.4mm), #4, 1/8" (3.2mm). #5, 5/32" (4mm). #6, 3/16" (4.8mm). 7/32" (5.5mm). #7, 7/32" (5.5mm). High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080000244-080000241-11370.
More....

Grace Starter Punches 1/16" (1.6mm) Starter Brass Punch in USA Specification
Grace Starter Punches 1/16" (1.6mm) Starter Brass Punch in USA Specification

USD 7.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: BSP116. For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Starter punch set includes 4 flathead, tapered punches for drifting sights and driving pins flush. Includes plastic storage pouch for easy access. Punches also available separately. Manufacturer: grace USA specs: starter punch set - 4 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32" dia. High quality gunsmith punches in U.S.A. specification by Grace, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 354000007-354000007-11370.
More....

Brownells Roll Pin Punches #7 Roll Pin Punch in USA Specification
Brownells Roll Pin Punches #7 Roll Pin Punch in USA Specification

USD 8.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 25006939. With these pins becoming so common in guns, having the right punches to remove them is absolutely necessary. These punches are the only way to remove and re-use roll or spring pins without causing glaring damage to the pins. Solid steel punches, with long, parallel-ground points and knurled section for better gripping. Manufacturer: brownells specs: kit includes one each of seven sizes: #1, 1/16" (1.6mm). #2, 5/64" (2.0mm). #3, 3/32" (2.4mm). #4, 1/8" (3.2mm). #5, 5/32" (4.0mm). #6, 3/16" (4.8mm). #7, 7/32" (5.5mm). High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 230100007-230100000-11370.
More....

Geissele Automatics Gas Block Punch Kit in USA Specification
Geissele Automatics Gas Block Punch Kit in USA Specification

USD 21.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 15172. The geissele gas block pin punch set are made speccifically for the removal and installation of the 0.078" roll pin that secures the gas tube to the gas block on an ar-15/ar-308. Removal of a rusted in gas block roll pin has always been a challenge. The geissele punch set make gas block work a whole lot easier. Manufacturer: geissele automatics llc. High quality gunsmith punches in U.S.A. specification by Geissele, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 100015137-100015137-11370.
More....

Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch in USA Specification
Grace Roll Pin Punch Set 8 Piece #brp 8 Brass Roll Pin Punch in USA Specification

USD 33.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: BRP8. Punches are machined from solid brass hex stock with a flat head and extra-long shaft to drive pins completely out. Brass is softer than steel, so it won't gouge the gun if you slip. Available as roll pin punches that have a dimple on the working end to keep the punch centered on the pin during use. Contains the following 8 sizes: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. All punches are 3 " long. Manufacturer: grace USA. High quality gunsmith punches in U.S.A. specification by Grace, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 749012802-749012802-11370.
More....

Brownells Starter Punch Set Replaceable Starter Punch Set in USA Specification
Brownells Starter Punch Set Replaceable Starter Punch Set in USA Specification

USD 22.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-513-000. We are constantly encouraging you to always use starting punches to break tight pins loose - then use a "drift" or pin-punch to drive the pin the rest of the way out. This saves bending pin punches, but much more importantly, it prevents fine guns from getting pin punch mars should the pin punch bend and slip - or - break, and scratch. To bring you the best possible starter punches, we have had special, short replaceable pins made up to fit our famous gunsmith's replacement punch set handles. Their regular use will definitely improve your production... And your professionalism! Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins 1" (2.5cm) long. Set includes 3 punches and three pins. Replacement pin sizes:.039" (.99mm) for 3⁄64" (1.2mm) diameter pins..060" (1.5mm) for 1⁄16" (1.6mm) diameter pins..091" (2.3mm) for 3⁄32" (2.4mm) diameter pins. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080513000-080513039-11370.
More....

Brownells Gunsmith's Alignment Pins Small Alignment Pin in USA Specification
Brownells Gunsmith's Alignment Pins Small Alignment Pin in USA Specification

USD 9.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 20606. Made for us exclusively, to our professional specifications, and are forged, taper-ground and polished. Dimensions set to give you size overlap from pin to pin to cover every conceivable situation. Tapers are 2" long on the 4" long pins. Manufacturer: brownells specs: taper as follows: small, from.070" (1.8mm) to.156" (4.0mm). Medium, from.110" (2.8mm) to.187" (4.7mm). Large, from.150" (3.8mm) to.219" (5.6mm). Knurled handle. Steel. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080645007-080645007-11370.
More....

Brownells Alignment & Push Punches .120" Diameter Steel in USA Specification
Brownells Alignment & Push Punches .120" Diameter Steel in USA Specification

USD 8.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-000-030. For the professional and home gunsmith alike these punches take much of the frustration out of aligning parts and assemblies. And they provide faster and easier disassembly, too. Furnished with a large, easy-to-grasp, handle that gives excellent control for aligning holes and starting pins. Slightly undersized shank provides a close fit that won't bind in the hole. A slight taper, 3⁄4" from the end is especially useful when fitting parts that require repeated assembly and disassembly. Four sizes fit the majority of pins found on the ar-15, 1911 auto, remington 870 and ruger revolvers. Won't roll off bench. Alignment/push punch set includes one each of the punches liste Manufacturer: brownells specs: handle - plastic. Shank - unhardened steel drill rod, or 360 alloy brass. 3 " (8.2cm) long. Oal - 4 " (12.1cm) long. Alignment/push punch set - contains (4) brass and (4) steel punches, (1) brass and (1) steel of each diameter:.092" (2.3mm),.120" (3mm). High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080000030-080000029-11370.
More....

Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .039 Dia. in USA Specification
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .039 Dia. in USA Specification

USD 10.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-507-239. Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080507239-080507239-11370.
More....

Brownells Small Dovetail Sight Punch in USA Specification
Brownells Small Dovetail Sight Punch in USA Specification

USD 9.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: SDTSP. The brownells small dovetail sight punch is designed to help with the installation, removal, and adjustment of front and rear small handgun sights. Unique triangular punch faces and heavy duty bodies create a great working tool for gunsmiths. The small dovetail sight punch has a base width of approximately 0.230". Manufacturer: brownells. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080001230-080001230-11370.
More....

Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch in USA Specification
Brownells Premium Roll Pin Punches 5/64" Roll Pin Punch in USA Specification

USD 6.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 564RSB. Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080001069-080001083-11370.
More....

Brownells Cup Tip Punches Model 2 .066" (1.7mm) Diameter/Long Length in USA Specification
Brownells Cup Tip Punches Model 2 .066" (1.7mm) Diameter/Long Length in USA Specification

USD 17.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-620-002. Eight concave "cupped" tip punches to precisely fit the round head pins found on smith & wesson handguns. Won't flatten the pin top and ruin the gun's looks. Made to the same specs as those used by the factory. Use 3mm punch on sig handguns. Complete set (set d listed below) includes a delrin bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Manufacturer: brownells specs: punches - steel. 5/16" (7.9mm) wide hex handle..057" (1.44mm)/long..066" (1.7mm)/long..072" (1.8mm/long..040" (1mm)/short..050" (1.3mm)/short..050" (1.3mm)/long. 3mm (.118")/long. 3mm (.118")/short. Bench bl. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080620002-080620001-11370.
More....

Starrett #565 Pin Punch Set Starrett Pin Punch 3/16" in USA Specification
Starrett #565 Pin Punch Set Starrett Pin Punch 3/16" in USA Specification

USD 12.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 52582. Precision ground from specially selected tool steel, hardened and highly polished, the starrett pin punches are well proportioned and beautifully finished. Blued, knurled grip area. Individually marked for size. Set of all 8 punches comes in handy, fitted, round, plastic bench box. Also available singly. Manufacturer: starrett specs: 4" (10.2cm) long. Sizes: 1/16" (1.6mm), 3/32" (2.4cm), 1/8" (3.2mm), 5/32" (4.0mm), 3/16" (4.8mm), 7/32" (5.5mm), " (6.3mm) and 5/16" (7.9mm). High quality gunsmith punches in U.S.A. specification by Starrett, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 827525820-827525780-11370.
More....

Grace Brass Punch Set 5/16" (7.9mm) Brass Pin Punch in USA Specification
Grace Brass Punch Set 5/16" (7.9mm) Brass Pin Punch in USA Specification

USD 8.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 516BPP. For drifting sights, driving pins or fitting parts when marking or scratching the surface can mean the difference between a job well done and disaster. Machined from premium, brass hex. Punch set includes 8 flathead, long shaft punches for driving pins completely out. Manufacturer: grace USA specs: brass, 5⁄16" (7.9mm) hex stock. Punch set - 8 punches: 1⁄16", 3⁄32", 1⁄8", 5⁄32", 3⁄16", 7⁄32", ", 5⁄16" dia. High quality gunsmith punches in U.S.A. specification by Grace, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 354100312-354100062-11370.
More....

Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length in USA Specification
Brownells Roll Pin Holders #4 1/8"(3.2mm) Dia 5"(12.7cm) O/A Length in USA Specification

USD 15.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-685-125. Holds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear m16/ar-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on sig handguns. Finish driving with roll pin punch. O/a in chart means "overall". Available individually or as a set of 5. Manufacturer: brownells specs: steel, knurled handle. Set of 5. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080685125-080685125-11370.
More....

Brownells Nylon/Brass Drift Punch Nylon Punch in USA Specification
Brownells Nylon/Brass Drift Punch Nylon Punch in USA Specification

USD 6.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-001-223. Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is.165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080001223-080475001-11370.
More....

Mayhew Steel Single Starting Punches 5/32" Starting Punch in USA Specification
Mayhew Steel Single Starting Punches 5/32" Starting Punch in USA Specification

USD 8.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 20503. Always use starting punches to break loose stuck or tight pins to protect both the pin punch and the gun. Manufacturer: mayhew steel specs: tool steel. Knurled body. High quality gunsmith punches in U.S.A. specification by Mayhew, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 587465156-587465062-11370.
More....

Brownells Premium Roll Pin Punches 7/32" Roll Pin Punch in USA Specification
Brownells Premium Roll Pin Punches 7/32" Roll Pin Punch in USA Specification

USD 6.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 732RSB. Hardened steel punches easily remove roll pins from firearms incorporating these pins. Balled tip helps locate the punch on the pin and protects pin end from damage during removal or installation. Available as a 7-punch set or sold individually, as listed below. Manufacturer: brownells specs: carbon steel, heat hardened. Set contains 1 each of 1⁄16",5⁄64", 3⁄32", 1⁄8", 5⁄32", 3⁄16", and 7⁄32" diameter punches. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080001074-080001083-11370.
More....

Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .091 Dia. in USA Specification
Brownells Gunsmith Replaceable Pin Punch Set Replacement Pin Punch 2" Long .091 Dia. in USA Specification

USD 10.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-507-291. Finally! what we think is the answer to the pin punch headache that has plagued us - and every other gunsmith who has ever knocked out a gun pin, had the punch break or bend, and been out of business until a new one could be made or ordered. Now - just replace the tip!handles, with removable knurled-chuck to hold punch, are made of powerful, fatigueproof c.R.S. Steel - tensile strength of over 140,000 psi (min.). Replaceable punch - the secret of the tool. These are special, tool steel, bevel-headed punches designed for the tool, die and mold manufacturers as perforators, punches, ejectors and core pins. Oil hardened to rc 58-60. Heads are annealed to rc 42-45. They come in two lengths a Manufacturer: brownells specs: handle 3" (7.6cm) long x 3/8" (9.5mm) diameter. Pins are 2" (5.1cm) or 2 " (6.3cm) long. Replacement pin punch sets include the following pin sizes: 0.039", 0.060", and 0.091" in either 2" or 2 " lengths. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080507291-080507239-11370.
More....

Gauge Rite Products Top Dead Center Punch in USA Specification
Gauge Rite Products Top Dead Center Punch in USA Specification

USD 37.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 871-100-000. The tdc is a rugged, foolproof tool to end the problems of off-center-work, broken taps and drills that come about from trying to "eyeball" top dead center on gun barrels or other round stock. Simple to use - just level and plumb the rifle on the drill press, place tdc on barrel or receiver, level the bubble and tap the punch. The punch mark is top dead center. Precision made. Shockproof level. Manufacturer: gauge-rite products specs: body - 1-15/16" (23.8mm) x 1- " (3.8mm) x 1" (2.5cm), aluminum. Punch - " (6.3mm) diameter tool steel. Locating rod - 5- " (14cm) long. High quality gunsmith punches in U.S.A. specification by Gauge-Rite, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 871100000-871100000-11370.
More....

Mayhew Steel Single Center Punches 455 in USA Specification
Mayhew Steel Single Center Punches 455 in USA Specification

USD 3.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 24300. Made of properly hardened, tempered and ground tool steel to fill the gunsmith's shop requirements. Manufacturer: mayhew steel specs: punch 222 is " (6.3mm) o.D. X 3 " (9.0cm) long. Punch 455 is 5⁄16" (7.9mm) o.D. X 4" (10.2cm) long. High quality gunsmith punches in U.S.A. specification by Mayhew, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 587113455-587111222-11370.
More....

Brownells Hole Center Punches #8 Hole Center Punch in USA Specification
Brownells Hole Center Punches #8 Hole Center Punch in USA Specification

USD 8.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-732-008. 3 special center punches with outside diameters (o.D.) that match the clearance drill size of the most popular sight, rib and scope base mounting screws. Ground, parallel-sided punches reach through even the thickest handgun rib. Ends guess-work and hole center-to-center spacing problems. To use: level gun in vise or scope mounting jig, position and level sight, rib or base, and clamp in place. Place correct size punch in hole and lightly tap with a 4-oz. Hammer. Remove base. Drill and tap first hole. Re-install base and check positioning. If everything is "square", re-clamp and finish other holes. Manufacturer: brownells specs: 2- " (7.0cm) long. " (6.3cm) dia. Knurled handle. Hardened, tool steel. Set contains one of each size. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080732008-080732006-11370.
More....

Brownells Nylon/Brass Drift Punch 5/16" Aluminum Punch Tip in USA Specification
Brownells Nylon/Brass Drift Punch 5/16" Aluminum Punch Tip in USA Specification

USD 4.99 (Indicative price - actual current price possibly lower)
Manufacturer product ID: 080-475-006. Great combination punch for gunsmith, machinist and toolmaker. Hi-impact steel handle with knurled grip for easy holding and accurate control. Built to withstand maximum impact with a minimum of distortion. Interchangeable and replaceable tips are available in: 5/16" nylon with steel reinforcing pin to prevent bending or breakage while giving completely mar-free punching action. Brass in various diameters for a harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Aluminum in two diamters for harder-than-nylon but softer-than-steel impact where slight discoloration is acceptable. Remington shotgun punch tip which is.165" di Manufacturer: brownells specs: handle is 3" (7.6cm) long x 3.8" (9.5mm) diamter. Tips are 1 " (3.2cm) long. High quality gunsmith punches in U.S.A. specification by Brownells, buy online with confidence at best discount price and fast shipping to USA. Distributor Item Nr: 080475006-080475001-11370.
More....











Try Search on this site - find exactly what you need!




Item on this page: Gunsmith Punches USA Specification



Home Page Search Products Contact Us Privacy Policy



Copyright © StarGunDepot.com : 1997 - 2021 : All rights reserved. 140-FT